Band Locking

How do I get my sensor to specifically lock to a particular band when testing an SSID.

sabine avatar
Written by sabine
Updated over a week ago

SSIDs (and aliases) can be tested on one band only. This means that sensors will only connect to the SSID and test it on the specified band. An SSID can be locked to 2.4 GHz only, 5 GHz only, or set to “Auto”. In Auto mode, which remains the default setting, the sensor will choose the best band to connect to similar to a regular client.

This can be found under the Advanced section on the Edit SSID modal.

Related links:

Did this answer your question?